• Pressure: Differential
• Details: 0.05% of full scale
• 11 Units: Pa, kPa, MPa, PSI, Kg / cm², Bar, mmBar, cmH20 ...
• Display: Large LCD screen 5 or 6 Digit & Bargraph in%
• 7 function keys
• Temperature compensation from 0 to 50 ° C
• 60 hour rechargeable lithium battery
• Integrated data logger
• Clean design & high performance
• CE & Exia II CT4Ga approved
• Calibration certificate with factory traceability

Accuracy: ± 0.3 °C
Stability: ± 0.05 °C
Resolution: 0.1 °C
Stabilization time: 7 minutes
Temperature unit: Selectable °C or °F
Well diameter: 19 mm
Immersion length: 100 mm
Heating time: 14 minutes (ambient to 123 °C)
Cooling time: 34 minutes (123 °C to (-)40 °C)
Interchangeable insert: Well for Ø 1/4’’ probes as standard (other sizes available on request).
Switch test: Provided
Power supply / Consumption: 100 V to 240V AC, 50 to 60 Hz, 150 W
Dimensions (L x W x H) / Weight: 160 x 365 x 350 mm / 9 kg
Enclosure type: Portable

Température range : 50 °C ~ 650 °C
Accuracy: ± 0.3 °C
Stability: ± 0.02 °C
Resolution: 0.01 °C
Stabilization time: 7 minutes
Temperature unit: °C or °F selectable
Well diameter: 30 mm
Immersion length: 150 mm
Heating time: 10 minutes (Amb. to 120 °C)
Cooling time: 15 minutes (Amb. to (-) 10 °C)
                    25 minutes (120 °C to (-) 10 °C)
Communication port: RS232 port
Calibration software: MET-CAL as standard
Switch test: Provided
Power supply / Consumption: 110V to 240V AC, 50 to 60 Hz, 150 W
Dimensions (W x D x H) / Weight: 160 x 365 x 450 mm / 9 kg
Type of case: Portable
Carrying case: Provided
ISO17025 calibration certificate: Provided

• Pressure range: -0.9 to 60 bar
• Media: Air
• Resolution: 1 mbar
• Connections Standard instruments: 3/8 BSP F
• Connections Instruments test: 1/4 BSP F
• Nylon hose 1 meter with suitable connector
• Ergonomics & Ease of use
• Robust Design & Stable Performance
• No specific maintenance to be expected

• Integrated pneumatic pressure pump up to 70 bar
• Pressure module: any scale from -0.95 to 70 bar
• Accuracy: 0.01 % of full scale
• Temperature compensation up to 50 °C 
• High stability & accuracy 
• Simulates & measures electrical signals
• 4.3 " TFT colour touch screen
• 8 hours battery life
• USB PC interface & Calibration software 
• ISO17025 traceable calibration certificate

• Compact, handheld, User friendly menu
• Easy to read Color Graphical TFT LCD display
• Rechargeable lithium Ion battery with enhanced power control for prolonged battery life
• Measure: mA/ V/ mV/ mA (24V)/ Switch-test / RTD/ TC/ Frequency/ Pulse
• Source: mA/ V/ mV/ mA(2W)/ Resistance/ RTD/ TC/ Frequency/ Pulse
• 24 VDC Loop power Supply to power transmitters and loops
• Step/Ramp functions with Auto/Man selection
• Universal Serial Bus (USB) communication port for charging, data retrieve and firmware upgrade
• Data Logging to measure long time drift
• Other Features: Max/Min/Average, filter settings, tare facility, adjustable backlight, alarm annunciation (on display and buzzer), glance screen mode
• Continuity Test
• Pulsed RTD transmitter compatible
• HART loop resistor

• Direct Temperature output 12 Switched Steps
• < 0.3 °C Accuracy
• Quick Check Switch BOX
• Allows 2, 3 or 4 wire connections
• Compact Size

• Easy to read Color Graphical TFT LCD display
• Rechargeable lithium ion battery with enhanced power control for prolonged battery life
• Measure or Source: mA, mV and V readings
• 24 VDC Loop power Supply to power transmitters and loops
• 2W simulate and Read/ Power mode for in-situ Loop checking and calibration
• Step/ Ramp functions with Auto/ Man selection
• Universal Serial Bus (USB) communication port for charging, data retrieve and firmware upgrade
• Data Logging to measure long time drift
• Other Features: Max/Min/Average, filter settings, tare facility, adjustable backlight, alarm annunciation (on display and buzzer), automatic Display off.

• Easy to read Color Graphical TFT LCD display
• Rechargeable lithium ion battery with enhanced power control for prolonged battery life
• Measure or Source: mA, mV and V readings
• 24 VDC Loop power Supply to power transmitters and loops
• 2W simulate and Read/ Power mode for in-situ Loop checking and calibration
• Step/ Ramp functions with Auto/ Man selection
• Universal Serial Bus (USB) communication port for charging, data retrieve and firmware upgrade
• Data Logging to measure long time drift
• Other Features: Max/Min/Average, filter settings, tare facility, adjustable backlight, alarm annunciation (on display and buzzer), automatic Display off.